Precision metering pumps, Zenith, Pumps C-9000 series products are widely used for the measurement of working fluid. Was designed with high standards of the best geometry AGMA gear and pump cavity with precision in order to ensure the accuracy of the output of each turn fluid displacement. 
 Since 1926, Zenith Pumps has been engaged in the design and manufacture of precision high-precision metering pumps. Over the years, Zenith, Pumps as a technology innovator of the gear pump applications, have been a number of industry sectors and broad user acceptance. 9000 series set many years of practical experience and continuous research and development, has become the latest generation of industrial Zenith, Pumps metering pump. Many engineers rely on the Zenith, Pumps metering pumps, fluid measurement program for the most complex measurement process design. This is the Zenith Pumps metering pump in a variety of requirements precision, no pulse, the reasons of reproducibility can be widely applied. 
 C-9000 high-precision metering pump applications: 
 For viscosity (1-50000 cps / 0.0003 50pa.s) and allow corrosion strict fluid metering and transmission. Can be used for the transportation of low-viscosity fluid under low pressure. 
 High-precision metering pumps advantages: 
 No pulse output, continuous duty, high precision, good repeat performance for high-precision measurement accuracy for industrial fluids ----- in a variety of temperature, viscosity, pressure conditions, can ensure a stable and repeatable flow. The measurement accuracy of up to 0.3%. Flow stability, no pulse output 
 Of C - 9000 high-precision metering pump series: for corrosive and non-lubricating fluids, 
 Material: 316 stainless steel and other materials to manufacture 
 Flow: Displacement (cc / rev): 0.3 | 0.6 | 1.2 | 2.4 | 4.5 | 9.0 | 
 Speed: Speed ??range: up to 1000 rpm 
 Flow Range: 8 ~ 9000CC/MIN up to 2.4 gallons / minute 
 Inlet pressure: 20 kg (300PSI) Highest 
 Outlet pressure: 70 kg (1000PSI) Highest 
 The pressure drop: 20 TO 1000PSI (depending on viscosity) 
 Temperature: minus 40 degrees minimum, the highest 175 degrees (magnetic couplings seal), 340 (depending on the shaft seal material) 
 Seal: Mechanical seal, lip seal, packing seal, magnetic coupling seals 
 Shift: clockwise (CW), facing the shaft end 
 Optional: hot plate, explosion-proof motor