Spinning metering pump advantages: 
 No pulse output, continuous duty, high precision, good repeat performance for the precision of industrial precision measurement of fluid spinning metering pump: even in the changing conditions of pressure, viscosity and temperature, can also ensure a stable, reproducible fluid . The measurement accuracy of up to 0.3%. 
 Minimum spinning metering pump pulse: unique design provides the ultimate non-pulsating fluid, without the need to hinder the performance of the valve and activities of the coupling element. 
 Spinning metering pump corrosion: for most of the conventional chemical applications, the 400 series stainless steel has good wear resistance and corrosion resistance characteristics. 
 Spinning metering pump high temperature performance: operating temperature up to 510 degrees 
 Spinning metering pump to extend the service life: only three moving parts, these parts of the hardenability of steel, the hardness of up to 62Rc in most designs, the low cost of re-assembly, replaceable sleeve bearings are standard pieces. 
 Spinning metering pump of high volumetric efficiency: to improve the volumetric efficiency can be the best operating clearance, school and under pressure through the internal load into the bolt to be assured. 
 Spinning metering pump structure precision: grinding and overlap-free parts for operating gap closed. 
 Pump type: Rotary, the outer teeth a straight cylindrical gear. 
 Work speed :3-180 rpm. 
 H-series pumps are suitable for the measurement of the following products 
 Adhesive foam urethane | plasticizer | single-base material | additives | Coatings | Surfactants | polyols | oil | tar oxide paste | Plastics | Dyes | Varnish | | Inks | fiber | lubricants | pigment Residue | Tar | | resin | Polymer | other products 
 Can choose different materials: used in a variety of spinning: \ aramid fiber, aramid fiber 1313 1414 \ PP \ hollow fiber \ etc 
 HPB pump 
 Displacement: 0.16 | 0.297 | 0.584 | 1.168 | 1.752 | 2.92CC / transfer 
 Interface: 3/8NPT imports 1/4NPT export 
 HMB pump 
 Displacement: 3.5 | 5.5 | 10.0CC turn 
 Interface: 1/2NPT imports, 5/16NPT, export 
 HLB pump 
 Displacement: 10 | 20 | 30 | 50CC / transfer 
 Interface: 1 "NPT inlet, 3/4NPT export 
 HXB pump 
 Displacement: 70 | 100 | 147.5 | 200CC / rev. 
 Interface: 2 "NPT inlet 3/2NPT out